Skip to Content
Top

The Dangers of Knob-and-Tube Wiring in Florida

Rewiring
|

Used in America from 1880 to the late 1940s, knob-and-tube wiring is an early style of electrical wiring identifiable by its white, ceramic, spool-like knobs. It still exists in some old homes, and it presents several dangers to modern-day tenants. It’s possible to even find knob-and-tube wiring in Florida. If you happen to have some in your home, be sure to let us know so we can help you replace it with modern wiring. We at Excel Electric know the best kind of wiring to replace your outdated wiring with something safer.

Here are five of the dangers knob-and-tube wiring in Florida presents to homeowners:

  1. Age. On average, knob-and-tube wiring ranges from 70 to 130 years old. Even if it has been working for a while, this old wiring doesn’t have the capacity needed for modern homes. This means it can overload easily and start a fire. In addition, the wiring is less resistant to damage than normal wiring. This represents another fire risk to homeowners.
  2. No ground wire. Knob-and-tube wiring is incompatible with modern 3-plug appliances. Because of this, anything plugged in is more liable for damage due to voltage fluctuations and surges. This is yet another fire hazard and can also cause electrical shocks.
  3. Bad against moisture. In addition to being ungrounded, knob-and-tube wiring is not rated for moisture. This makes it especially dangerous in wetter areas such as kitchens, bathrooms, and outside.
  4. Easily overlooked. Knob-and-tube wiring often gets buried in insulation and pushed into contact with building materials and other clutter. Since knob-and-tube wiring is designed to release heat freely into the air, this presents yet another fire hazard. Insurance companies often won’t offer insurance for buildings with that wiring because the National Electric Code (NEC) states that knob-and-tube wiring has to stay away from insulation.
  5. Improper DIY modifications. Out of all the kinds of wiring, unsafe DIY modifications are most often seen with knob-and-tube wiring. Part of this is from how easy it is to access for splicing. It’s not uncommon to see someone use masking or Scotch tape (instead of electrical tape) in their DIY connections. Even worse, DIY rookies often install fuses with an amperage too high for the wiring, overloading the wires and making another major fire risk.

Why should I get Excel Electric to replace my knob-and-tube wiring in Florida?

Since 2009, Excel Electric has been working with Florida homeowners to help them make the most of their electrical systems. We stand by our principles of quality, integrity, and honesty no matter what job we do, whether it’s providing outdoor lighting or rewiring a home to remove knob-and-tube wiring in Florida. Here at Excel Electric, going above and beyond expectations is just a part of the job! If you need electrical assistance with your home, call on Excel Electric today!

Categories: 
Share To: